The latest Cambium Enterprise Wi-Fi release 6.3.5-r4 is now available in cnMaestro and XMS-Cloud.
Firmware and all documents are uploaded on the support site for XV3-8 and XV2-2 on the following links:
https://support.cambiumnetworks.com/files/wifi6_xv3_8/
https://support.cambiumnetworks.com/files/wifi6_xv2_2/
https://support.cambiumnetworks.com/files/wifi6_docs/
6.3.5 handles the Wi-Fi fragmentation attacks (FragAttacks Security Advisory) and fixes some critical bugs.
Issues fixed in System Release 6.3.5
| Tracking |
Product |
Description |
| FLCN-10397 |
所有 |
Random kernel panic was observed in QCA modules. |
| FLCN-10232 |
所有 |
When there is a MDNS packets flood in the network, AP does not respond over the network and starts dropping packets. |
| FLCN-10128 |
XV3-8 |
With LACP configured on AP and WLAN has a VLAN, the wireless clients do not get a DHCP address. |
| FLCN-10030 |
所有 |
AP displays incorrect times and were unable to update to correct times using NTP after experiencing a power outage. |
| FLCN-10029 |
XV3-8 |
Radio 3 does not beacon if the channel is set to “auto” for the 40 MHz bandwidth. |
| FLCN-9945 |
所有 |
Optimized channels gets reset when the configuration is pushed from XMS. |
| FLCN-9838 |
所有 |
Neighbor reports in 11k/v must filter only Cambium OUI. |
| FLCN-9916 |
所有 |
美联社必须响应邻居与各自的年代ecurity settings in neighbor report. |
| FLCN-9915 |
所有 |
Mobility domain is not parsed when suggesting the neighbor reports. |
Known issues in System Release 6.3.5
| Tracking |
Product |
Description / Workaround |
| FLCN-10441 |
所有 |
Channels 169 and 173 are not supported in System Release 6.3.
Workaround: None |
| FLCN-10434 |
所有 |
Radio is getting disabled when the static channel is set for Russia.
Workaround: None |
| FLCN-10425 |
所有 |
Client fails to connect when guest portal is enabled with enterprise security.
Workaround: None |
| FLCN-10227 |
所有 |
Unable to enable 11r and okc configuration items in the device UI.
Workaround: None |
| FLCN-10215 |
所有 |
Unable to connect with WPA2/WPA3 pre-shared key when EPSK is enabled.
Workaround: None |
| FLCN-9723 |
所有 |
The GA redirection for Proxy Redirection port is not working properly.
Workaround: None |
| FLCN-9697 |
所有 |
The client VLAN is getting changed after roam with RADIUS based VLAN pooling.
Workaround: None |
| FLCN-9657 |
所有 |
DNS-ACL is getting applied before the Guest Access.
Workaround: None |
| FLCN-9512 |
所有 |
The DNS Resolution fails for GRE host when primary DNS server is not reachable.
Workaround: None |
| FLCN-8612 |
所有 |
ePSK VLAN is not honored after 11r roaming.
Workaround: None |
| FLCN-8583 |
所有 |
The DHCP Pool is not kept solely within the AP. The IP NAT inside allows LAN connected devices to pull IP addresses.
Workaround: None |
| FLCN-8391 |
所有 |
The device is not able to decode few macro-based NAS identifiers.
Workaround: None |
| FLCN-8176 |
所有 |
If a 4G USB dongle is plugged in or unplugged, the device is not detecting a new IP. Hence no events are registered.
Workaround: None |
| FLCN-8107 |
所有 |
Information on very High Throughput (VHT) is advertised in the 11n/11gn mode (2.4 GHz band).
Workaround: None |
Limitations in System Release 6.3.5
| Tracking |
Product |
Description |
| FLCN-9424 |
所有 |
Smart Steering/Enhanced roaming must not be enabled in a single AP deployment scenario. |
| FLCN-8476 |
XV2-2 |
The 160 MHz bandwidth is not supported. |
| FLCN-7675 |
所有 |
Multicast isolation is not supported. |
| FLCN-7674 |
所有 |
Cisco Discovery Protocol (CDP) is not supported. |
